Tag Archives: bottle opener

Common Walter Bosse Fakes – Donkey Salt and Pepper Holder

 

Walter Bosse Style Donkey Holder with Salt and Pepper Shakers

Walter Bosse Style Donkey Holder with Salt and Pepper Shakers Walter Bosse Style Donkey Holder with Salt and Pepper Shakers Walter Bosse Style Donkey Holder with Salt and Pepper Shakers Walter Bosse Salt and Pepper Shakers

Walter Bosse style Donkey Pulling Wooden Cart Salt CellarWe’ve seen this donkey holder with salt and pepper shakers all over the place! Generally, these donkeys are made of  metal coated with paint, with wooden salt and pepper pots resting on brass wire rings. The brass wire rings are attached to a piece of metal that rests in the middle of the donkey’s back like a saddle and are riveted in place. We have also seen versions of these donkeys pulling wooden carts with matching wooden spoons/scoops. They look to be used as salt cellars. It has quite often been attributed to Bosse but it just so happens it is NOT made by him. We’ll outline the details why below!

  1. These donkeys seem to be made of a white/silver metal (which Bosse did not work in) and coated in a black paint or enamel. As a result, the black paint tends to chip off in little flakes, revealing the metal underneath. If you are not sure and want to test what the metal is, it’s a good idea to pick an inconspicuous place like the bottom of one of the feet and do a small test scratch. Generally, if the metal is silver, it is not Bosse!
  2. The donkey has no polishing points and is just solid black. Bosse liked to use the play between matte black and shiny polished brass to highlight areas of design on his animals. He either fully polished or acid etched a patina and highlighted with polishing, but he never left items with a full patina and no polishing. Often times, you will find vintage Bosse brass items that look all black, but if you look closely, you can see the original areas of polishing.
  3. The design of the donkey is similar to Bosse, but not the same. The design of the legs and tail are too thin.

This donkey is one of the items that walks a line between being a copy and being a similarly modernist styled item. A few of the things that make this donkey more of a copy are the ears, eyes, tail and mane: they are all very similar to Bosse’s. The salt and pepper pots have also been seen with authentic Bosse models. This could be because these salt and pepper pots were an off-the-shelf item you could get locally. We’ve seen these pop up mostly around Europe and Austria so it was most likely another Austrian maker working in the same period of the 60s. This donkey is always unmarked.

Real Bosse Salt & Pepper Holders:

See some of Bosse’s original salt and pepper holders below for comparison. The zebra is marked “Baller Austria” and has toothpick holder pots instead of salt and pepper pots. The first donkey is marked “Baller Austria” and has glass pots with brass screw on tops. The second donkey is a later model done while Bosse was in Germany. It has a rougher and flatter shape and has bent brass wire rings resting on its back for holding the salt and pepper pots. The camel has the same wooden shaped salt and pepper pots as the fake donkey above. It is marked “Baller Austria”. All the holders (with the exception of the German donkey) have the rings for holding the salt and pepper pots cast in place with the animal. They are not a separate piece.

Walter Bosse Zebra Holder with Salt and Pepper Shakers Walter Bosse Donkey Holder with Salt and Pepper Shakers Walter Bosse Donkey Holder with Salt and Pepper Shakers Walter Bosse Camel Holder with Salt and Pepper Shakers

Posted in Bosse Blog | Tagged , , , , , , | Leave a comment

Common Walter Bosse Fakes – Dachshund Bottle Opener

Fake Walter Bosse Dachshund Bottle Opener

We’re not sure where this little dachshund figurine came from but it sure is cute! These are often attributed to Bosse but are NOT made by him. Though he did work with un-patinated polished brass it was mostly early in his career. It took quite a bit more finishing work to get a high-shine finish. Working with black patina over brass and picking your highlights was actually an easier process and would hide casting issues much more easily.

This is another item we wouldn’t necessarily deem a fake but more of a similarly modernist styled item. We’ve seen this dachshund pop up mostly around Europe and Austria so it was most likely another Austrian maker working in the same period of the 60s. This little guy works as a bottle opener and knife/spoon rest and is always unmarked. It’s also pretty common and would bring about $35-$45 depending on condition.

Posted in Bosse Blog | Tagged , , , , , , | Leave a comment

Common Walter Bosse Fakes – England

Walter Bosse England Fakes Collection

Some of the most common Walter Bosse fakes out on the market right now are a collection of items from England. Almost always unmarked, the most common items are giraffes, horses, firehorses, dachshunds, donkeys, cats, gazelles, kangaroo, ducks, geese, and elephants. Sometime in the 1960s–’70s, a company in England started making copies of a few select Bosse models, and even went so far as to try and copyright them. We’ve seen a few marked items, and they are most often hand ashtrays and corkscrews. You can even find a patent number on the bottom of some of the items. After doing a bit of research on one of these patent numbers, we found it was associated with a generic casting company in England in the ’60s. They were most likely making these items on the side to make some extra money.

Is my item an authentic Walter Bosse or a copy from England?
Walter Bosse Real vs. Fake English Firehorse Though some of the items are direct copies of Bosse’s work (like the firehorse, elephant, and donkey) many are not Bosse’s work at all. In the case of the firehorse, the English fakes just have the tips of the mane and tail polished, and not the whole mane or tail. These are also slightly smaller as they were most likely cast from a Bosse casting, not the original master. Similar to the Taxco fakes out there, these items were most likely imagined by an artist working for the casting company in the style of the items taken directly from Bosse. These English castings can be identified by their shiny black painted surface, which chips easily. They were not familiar with Bosse’s patina process, so they used black paint instead.

Any questions? Feel free to ask!

Check out all the fakes below:

Posted in Bosse Blog | Tagged , , , , , , , , , , , , | Leave a comment